WF100Technical details
WF100| AERIAL | ||
|
Parabolic |
6 foot | 8 foot |
| Beam width | 2.1° | 1.7° |
| Gain | 38dB | 40dB |
| Elevation over Azimuth pedestal with printed circuit low voltage motors | ||
| Elevation adjustable between -2° and 90° Azimuth Speed: 0-5 RPM | ||
| 1500 rpm connical scan RF feed for windfinding, parked in Surveillance mode(Met) |
||
| TRANSMITTER | ||
| 5600 - 5650 MHz | ||
| 250 kW. peak power | ||
| Pulse length 0.25 & 2 microseconds at a PRF of 250 pps | ||
| RECEIVER | ||
| -110dBm Receiver Noise Level, Swept Gain 28dB 5-128 km | ||
| SERVO | ||
| Transistor output, Manual and Auto Track /0-5rpm Azimuth and manual control for Met mode | ||
| DISPLAY | ||
| Surveillance mode:(Met) | Scan converted 19" Barco RGB monitor | |
|
Windfinding mode: |
7 segment LED readouts for Range; 0-240km, 2m resolution Angle ; 0.2° resolution |
|
| 5"??A/R Scan display, 4 ranges: 5,60,120,240km |
||
|
DATA OUTPUT |
||
| Surveillance mode: | 6 level DVIP colour raster display | |
| Windfinding mode: | Automatic printout of time , range, azimuth, wind speed/direct/height | |
| Tracking Accuracy:; - 20m RMS and 0.07° at 100km on 50cm target | ||
| POWER SUPPLY 240vac 50Hz 2kVA | ||
| OTHER EQUIPMENT | ||
|
PRINTER:
Datel-Intersil APP-20: |
||
(1) WF100-5C Windfinding Radar Operators Handbook, October 1982